2349 1UP INSPECTION DEVICEDownload .pdf

The 2349 1UP Inspection Device was developed for balloon catheter tests according to DIN EN ISO 10555.
The testing is performed in a tempered water bath with precise pressure control and an optical micrometer. Pressure cycles for products with different requirements can be defined and saved as recipes. The test result is generated as XPS or PDF and can be saved locally or on a network folder. The network compatibility allows a connection to an external database.

Burst Test: continuous pressure increase with defined speed to burst pressure

Compliance/Multiple Inflation Test: gradual pressure increase with dwell times for measuring the compliance balloon diameter

Inflation and deflation measurement: cycle measurement filling and emptying of the product

Technical Specifications:
test pressure up to 50 bar ± 0.05 (725 psi ± 0.725)
pressure medium: H2O
water temperature of water bath: 25 – 50 °C ± 2 °C
product dimension: ø 0.5 – 65 mm/L=200 mm
diameter measurement accuracy: ± 3 µm
test connection Luer Lock male and tube gripper
low pressure system: 6 – 8 bar (87–116 psi) for product fixation
bottle for test liquid
user-friendly interface BW-TEC HMI on touchscreen
PLC controller and PC for HMI and data management, network compatible
dimensions (L x W x H): 700 x 640 x 1320 mm
weight: 110 kg
power: 110 or 230 VAC/1300 W


Product Guidance Catheter
Test Unit Water Bath
Product Guidance Balloon