1600 1UP Necking Machine

1600 1UP NECKING MACHINEDownload .pdf

The Necking Machine is designed to neck down balloon tubes.
The tube is pulled through a heated die and reduced to a defined diameter. The die is split into two parts to enable easy loading. The final diameter of the tube can be changed by adjusting the following parameters: die diameter, temperature, speed and sensor position.
The parameters of every product can be stored as recipe in order to achieve reproducibility. The machine provides fast process time and precisely repeatable lengths, even with larger tube dimensions which are difficult to process on hot air neck down systems.

Technical Specifications:
cycle time: 10–30 sec per product side
tube diameter: 0.7–8 mm
neck down diameter: 0.6–4 mm
pneumatically actuated clamps
1 linear guide with ball screw spindle and 3Phase stepper motor 1.5 Nm
max. linear movement: 440 mm
linear travel speed: 1–100 mm/s
process temperature: 20–200 °C
user interface with BW-TEC HMI on touchscreen
PLC Controller and PC for HMI and Data management
network compatible
dimensions (L x W x H): 980 x 670 x 655 mm
weight: 60 kg
power: 115/230 VAC
air pressure: 6–8 bar (87–116 psi)


Sensor to detect Parison
Pneumatic Gripper
Split Die in Action