info@bwtec.com +41 44 863 70 70
801 Inprocess Balloon Tester
INPROCESS BALLOON TESTER 801Download .pdf

This test unit the Inprocess Balloon Tester is generally used for in-process testing of balloons. After the forming process, the balloon is connected to the test unit. One side is clamped in the tester and the other side is closed by a clamp. The balloon is filled with pressurized air. The balloon can easily be checked visually or measured by any gauge.

Technical Specifications: | |
---|---|
Pneumatically actuated tube connetor with clamping rings 0.5–2.5 mm | |
Pressure controller for 1 to 10 bar (14– 145 psi) | |
Pressure display | |
Foot switch pressure on/off | |
Dimensions | 100 x 100 mm |
Weight | 0.7 kg |