info@bwtec.com +41 44 863 70 70
1942 Leak Tester
LEAK TESTER 1942Download .pdf

This leak tester is used for the simultaneous final inspection of up to eight balloon catheters.
The product is subjected to a specific pressure
or vacuum and held for a defined time. The corresponding LED flashes when the pressure drops below the specification.
The process parameters can be entered and
managed via the user interface. The process data is displayed directly and can be visualized graphically in the test report. The process can consist of up to five parameter steps,
which start automatically or manually.
The balloons can be deflated with a vacuum pump after the test.
Technical Specifications: | |
---|---|
test connections: 8x Luer male | |
pressure range: 0–50 bar (725 psi) | |
pressure control accuracy: +/– 0.25 bar (+/– 4 psi) | |
measurement accuracy: 0.01 bar (0.15 psi) | |
vacuum: diaphragm pump 230 mbar (3.3 psi) absolute | |
medium: air or N2 | |
process parameters: set pressure, pressure difference, pressure ramp, holding time and measuring time | |
dimensions (L x W x H): 800 x 404 x 400 mm | |
weight: 25 kg | |
power: 240 W | |
voltage: 110 –240 VAC, 50 – 60 Hz |