1800 1up Balloon Forming Machine

1800 1up Balloon Forming MachineDownload .pdf

This Balloon Forming Machine is designed to produce a variety of plastic balloons.
The electrical heated stretch blow moulding process allows the production of different balloons for angioplasty and other medical applications. This machine is equipped with a SPS Controller and PC with touchscreen. A connection to an external database will also be provided. The moulds are clamped by a compact cylinder in a linear slide guidance.

Balloon mould diameter between 1.5 to 40 mm and the balloon length from 10 to 300 mm and more are possible. All process parameters for specific products can be stored in separate menus.

Technical Specifications:
up to 150 balloons per shift
balloon mould diameter: Ø 1.5–40 mm
balloon mould length: 10–300 mm
better heating block connection with barcode scanner for serial number detection
process temperatures: 20–250 °C (68–482 °F) cooling with external system
process time: 2–5 min
pneumatically actuated fasteners are used for holding the product
process pressure: 0–50 bar (0–725 psi)
Low pressure system 6–10 bar (87–145 psi) for product fixation
linear stretching way: left 400 mm, right 500 mm (minus heating block)
3-phase stepper motors
simple user interface with BW-TEC HMI on touchscreen
PLC controller and PC for HMI and data management, network compatible
optional: force measurement
dimensions (L x W x H): 1500 x 750 x 1350 mm
weight: 120 kg
power: 110/230 VAC, 1400 W, others upon request


Product Fixture
Heating Block with Bar Code
Connector for Heating Block


alternative link to the video